Home

How To Clean Waterpik? 5 Methods To Clean It

How To Clean Waterpik

Do you use a Waterpik then you should also about how to clean Waterpik? Here I will tell you about the different steps that will help you in cleaning the Waterpik properly. Each step mentioned will tell you how to properly clean every part of the Waterpik. You will be happy when you will be able to clean the water flosser that you use daily in simple ways. The information that I will explain will be helpful for you in keeping your oral hygiene in a good state. Let us discuss now how to clean Waterpik in the following.

How To Clean Waterpik?

There are some steps to how to clean Waterpik properly. You would like to know about them but first, have a look at them.

  1. Cleaning of the exterior surface
  2. Washing water reservoir
  3. Cleaning of the Internal components
  4. Washing Flossing tip
  5. Cleaning of the Handle

Steps To Clean Waterpik

Here are the steps for how to clean Waterpik carefully. I will explain every step in detail so that you will get a complete idea about cleaning the water flosser. So let us start with cleaning the outer surface of the Waterpik.

Cleaning Of The Exterior Surface

You will come to know the method for cleaning the exterior surface here. Let see how to do it.

  1. Take a clean soft cloth.
  2. Use a mild detergent or vinegar.
  3. Put it on the cloth.
  4. Now wipe the outer side of the flosser.
  5. Let it dry.

Now let us learn about washing the water reservoir of the Waterpik.

Washing Water Reservoir

In the following, I will describe the steps for cleansing the reservoir of water located inside the Waterpik.

  1. You should read your Waterpik Manual.
  2. Now check for a reservoir valve if present.
  3. The next step is to take out the water reservoir.
  4. Wash the valve for up to 45 seconds using warm water.
  5. Keep it for drying.
  6. Now get the water reservoir and put it in the dishwasher.
  7. Place the reservoir mouth facing the downside in the rack.
  8. Run the dishwasher for cleaning the water reservoir without a valve.
  9. After washing the reservoir keep it for air drying.

Cleaning Of The Internal Components

To clean the internal components you should do the following things and do it with caution. You will be able to know how to clean Waterpik mold from the inside.

  1. Get white vinegar for cleaning the internal part.
  2. Use 1 part of it.
  3. Mix 8 parts of warm water in the vinegar.
  4. Now fill this solution in the water reservoir of a flosser.
  5. Allow the flosser to work until the reservoir gets empty.
  6. This will help to clean the mineral deposits inside the flosser.
  7. You can run it again with warm water for removing the excess vinegar.

Washing Flossing Tip

The washing of the flossing tip is also an important step that you should do. It is necessary to clean the flossing tip as it may be contaminated with the bacteria. So let us see how to clean the Waterpik water flosser tip.

  1. Take the flossing tip out.
  2. Now use an antibacterial mouthwash solution.
  3. Pour it into a container.
  4. Now place the tip inside it for 5 minutes.
  5. After soaking remove it out.
  6. Rinse it with warm water.
  7. Do this process every 3 to 6 months for better results.

Cleaning Of The Handle

You should also know how to clean the Waterpik water flosser handle. As the handle is also a part of the unit which may be contaminated as you touch it several times. You will come to know this process in the following.

  1. Get white vinegar for the cleaning handle.
  2. Pour it into a container.
  3. Remove the tip and separate the handle.
  4. Now dip the handle in the container.
  5. Wait for 5 minutes.
  6. Remove the handle out of the vinegar.
  7. Rinse it with warm water.
  8. Dry the handle properly.

How To Clean Waterpik Cordless?

Here are some steps that you will need to do for cleaning cordless Waterpik. This method will work for cordless Waterpik troubleshooting.

  1. You should clean external components with a cloth.
  2. Now check for a reservoir valve if present.
  3. The next step is to take out the water reservoir.
  4. Wash the valve for up to 45 seconds using warm water.
  5. Keep it for drying.
  6. Now get the water reservoir and put it in the dishwasher.
  7. Place the reservoir mouth facing the downside in the rack.
  8. Run the dishwasher for cleaning the water reservoir without a valve.
  9. After washing the reservoir keep it for air drying.
  10. Now put the reservoir back in the flosser.
  11. Fill the warm water in the reservoir.
  12. Run the water flosser.
  13. After complete emptying continues the run for up to 10 seconds more.
  14. This will remove excess water.

How To Clean Waterpik Tube?

For cleaning the Waterpik tube you will need to do the following things.

  1. Take the flossing tip tube.
  2. Now use hydrogen peroxide solution.
  3. Pour it into a container.
  4. Now place the tip inside it for 5 minutes.
  5. After soaking remove it out.
  6. Rinse this with warm water.
  7. Replace it every 3 to 6 months for good results.

How To Clean Waterpik Before Use?

You can clean the Waterpik contamination before use with the help of the following process.

  1. Get white vinegar for cleaning the internal part.
  2. Use 1 part of it.
  3. Mix 8 parts of warm water in the vinegar.
  4. Now fill this solution in the water reservoir of a flosser.
  5. Allow the flosser to work until the reservoir gets empty.
  6. This will help to clean the mineral deposits inside the flosser.
  7. You can run it again with warm water for removing the excess vinegar.
  8. After the reservoir gets empty run the flosser for 10 seconds more.

How To Clean Waterpik Sonic-Fusion?

The method that you can use for cleaning the Sonic fusion Waterpik is given below. Read it carefully if you have one. This will prevent mold in Waterpik and avoid the deposition of mineral salts.

  1. Get white vinegar for cleaning the internal part.
  2. Use 2 tablespoons of it.
  3. Mix warm water in it.
  4. Fill the water reservoir.
  5. Start the flosser.
  6. Run it till the reservoir is having no water.

FAQ

How Often Should You Clean A Waterpik?

You should clean your Waterpik every once in three months as it is recommended by many dentists. This is an important and essential process that will help you in keeping oral hygiene in good condition. The things you need to do for cleaning the Waterpik flosser are as follows.

  • Cleaning of the exterior surface
  • Washing water reservoir
  • Cleaning of the Internal components
  • Washing Flossing tip
  • Cleaning of the Handle

How Do You Clean A Portable Waterpik Flosser?

You can clean a portable Waterpik flosser.

  1. Get white vinegar for cleaning the internal part.
  2. Use 2 tablespoons of it.
  3. Mix warm water in it.
  4. Fill the water reservoir.
  5. Start the flosser.
  6. Run it till the reservoir is having no water.

Can I Use Listerine In My Waterpik?

Yes, you can use a small amount of Listerine in your Waterpik for additional benefits. Listerine mouthwash can be helpful for you to add flavor to the water while flossing. However, using plain warm water is more suitable.

Can I Put Hydrogen Peroxide In My Waterpik?

Yes, you can put hydrogen peroxide in your Waterpik. However, you should use an optimum amount of hydrogen peroxide by diluting it with water.

Is Bleach Safe For Cleaning Waterpik?

No, cleaning Waterpik with bleach is not safe. As it may damage the Waterpik due to its harsh property. It may also affect on working of the Waterpik flosser.

Conclusion

In this article, we learned how to clean Waterpik completely. You came to know about different things that I have shared with you that might not be known before. However, it was a piece of helpful information that told you the cleaning process of how to take apart Waterpik water flosser and components. The steps that you read here will help you in washing the Waterpik flosser. The information that I have described contained the different ways of cleaning the contaminants and mold from the flosser. I told you how you can use vinegar, hydrogen peroxide, and water for cleaning this daily utilized tool for flossing.

In the end, you also saw some of the common queries that may have come to your mind while reading the information. So now you have got an overall idea about how to clean Waterpik on your own.

About the author

Rudresh Ratnaparkhe

I live in Pune city. I love to express my thoughts out of words. I like to write valuable writings for people. I like to grow my knowledge for everything. I love to read informative books and articles

Leave a Comment